Product finder
The CSN® cartridge heater with integrated cooling section, flange and built-in controller/limiter enables precise temperature control, overheating protection and easy installation.
Our cartridge heaters are used in situations where direct heating by conventional tubular heaters is not possible or where the possibility of replacing electrical heating elements without first emptying the tank is an advantage. This version is equipped with a flange and an integrated cooling section, which enables it to be used for higher output requirements. In addition, it is equipped with a built-in temperature controller or safety temperature limiter or temperature controller including limiter (with internal position). This radiator is a reliable solution for precise temperature control and uncomplicated maintenance.
Medium
Water; hydraulic oil; gear oil; oil; thermal oil; diesel/heating oil; AdBlue
Power
0.2 to 10 kW
Voltage
110 to 690 V
Connection
Flange according to DIN EN 1092-1 and ASME B16.5
Nominal size flange
DN80 /ASME 3"
Flange materials
P250GH/C22.8 (steel); 1.4571 (AISI 316 Ti); S235JR
Flange pressure stage
PN16; ASME 150lbs and 300lbs
Sheath materials
Steel; 1.4571 (AISI 316 Ti); 1.4404 (AISI 316L)
Terminal box
Painted steel
Installation length
300 to 3500 mm
Controller
EM-1, 0 - 100°C
Limiter
EM-5, 0 - 150°C
Installation position
horizontal
vertical on request
Operating pressure
up to 16 bar g
Operating temperature
max. 200 °C
| Article number | Type |
Power (kW) |
Voltage (V~) |
Installation length (EL in mm) |
Temperature Controller |
Temperature Limiter |
⌀ Pipe (mm) |
Surfaces Load (W/cm²) | DIN | Nominal width | Pressure level | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Weitere Informationen anfragen
VC051136
| 91/F52-30 | 0.6 | 230 | 300 | 1 pole 0-100°C | 1 pole 0-150°C, Fixed 100°C | 52 | 1.47 | EN1092-1 | 50 | 6 | ||
Weitere Informationen anfragen
VC051159
| 91/F52-40 | 0.85 | 230 | 400 | 1 pole 0-100°C | 1 pole 0-150°C, Fixed 100°C | 52 | 1.49 | EN1092-1 | 50 | 6 | ||
Weitere Informationen anfragen
VC051160
| 91/F52-50 | 1.1 | 230 | 500 | 1 pole 0-100°C | 1 pole 0-150°C, Fixed 100°C | 52 | 1.5 | EN1092-1 | 50 | 6 | ||
Weitere Informationen anfragen
VC051161
| 91/F52-60 | 1.35 | 230 | 600 | 1 pole 0-100°C | 1 pole 0-150°C, Fixed 100°C | 52 | 1.5 | EN1092-1 | 50 | 6 | ||
Weitere Informationen anfragen
VC051162
| 91/F52-70 | 1.6 | 230 | 700 | 1 pole 0-100°C | 1 pole 0-150°C, Fixed 100°C | 52 | 1.51 | EN1092-1 | 50 | 6 | ||
Weitere Informationen anfragen
VC051163
| 91/F52-80 | 1.8 | 230 | 800 | 1 pole 0-100°C | 1 pole 0-150°C, Fixed 100°C | 52 | 1.47 | EN1092-1 | 50 | 6 | ||
Weitere Informationen anfragen
VC051164
| 91/F52-100 | 2.3 | 230 | 1000 | 1 pole 0-100°C | 1 pole 0-150°C, Fixed 100°C | 52 | 1.48 | EN1092-1 | 50 | 6 | ||
Weitere Informationen anfragen
VC051165
| 91/F52-30 | 1.2 | 230 | 300 | 1 pole 0-100°C | 1 pole 0-150°C, Fixed 100°C | 52 | 2.94 | EN1092-1 | 50 | 6 | ||
Weitere Informationen anfragen
VC051151
| 91/F52-40 | 1.7 | 230 | 400 | 1 pole 0-100°C | 1 pole 0-150°C, Fixed 100°C | 52 | 2.97 | EN1092-1 | 50 | 6 | ||
Weitere Informationen anfragen
VC051152
| 91/F52-50 | 2.2 | 230 | 500 | 1 pole 0-100°C | 1 pole 0-150°C, Fixed 100°C | 52 | 2.99 | EN1092-1 | 50 | 6 | ||
Weitere Informationen anfragen
VC051154
| 91/F52-60 | 2.7 | 230 | 600 | 1 pole 0-100°C | 1 pole 0-150°C, Fixed 100°C | 52 | 3.01 | EN1092-1 | 50 | 6 | ||
Weitere Informationen anfragen
VC051156
| 91/F52-70 | 3.1 | 230 | 700 | 1 pole 0-100°C | 1 pole 0-150°C, Fixed 100°C | 52 | 2.92 | EN1092-1 | 50 | 6 | ||
Weitere Informationen anfragen
VC051157
| 91/F52-80 | 3.6 | 230 | 800 | 1 pole 0-100°C | 1 pole 0-150°C, Fixed 100°C | 52 | 2.94 | EN1092-1 | 50 | 6 | ||
Weitere Informationen anfragen
VC051158
| 91/F52-100 | 4.6 | 230 | 1000 | 1 pole 0-100°C | 1 pole 0-150°C, Fixed 100°C | 52 | 2.97 | EN1092-1 | 50 | 6 |
Individual variants available on request.
Dominik Naumann
+49 (0) 2392 692-61
dominik.naumann@schniewindt.de
Jonas Timmermann
+49 (0) 2392 692-37
jonas.timmermann@schniewindt.de
